Is your console overheating, noisy or shutting down on its own?
If your console's fan sounds like a plane taking off, the casing is hot to the touch, or your game freezes and the console suddenly switches off, the problem is almost always the same: temperatures that are too high. Poor cooling isn't just annoying: over time it reduces performance and can permanently damage internal components.
The good news is that, in most cases, targeted maintenance fixes it. In this guide we look at why a console overheats and which services bring temperatures back to safe levels: thermal paste replacement, liquid metal application and professional internal cleaning.
Why does a console overheat?
Heat is electronics' number one enemy. Every console — PS5, PS4, Xbox Series X|S, Xbox One and the rest — generates heat when the processor is working, and relies on a cooling system made up of a heatsink, a fan and thermal paste to get rid of it. With use, this system loses effectiveness for a few recurring reasons:
- Degraded thermal paste: the compound that transfers heat from the processor to the heatsink dries out over time and loses conductivity. It's the most common cause of overheating in consoles that are a few years old.
- Built-up dust: dust and lint clog the fan, vents and heatsink, blocking airflow and trapping heat inside.
- Environment and placement: a console shut inside a cabinet, poor ventilation or a hot room make an already critical situation worse.
- Wear of the cooling system: less efficient fans and deteriorated thermal pads complete the picture.
Warning signs not to ignore
Reading the symptoms in time avoids more expensive damage. Pay attention if you notice:
- A very loud fan even with light games or right after switching on.
- A hot or scorching casing, especially around the vents.
- Sudden shutdowns or temperature-related error messages.
- Performance drops, stuttering (frame drops) or freezes while gaming.
These behaviours mean the cooling system can no longer dissipate heat properly. It's the right time for maintenance.
Solutions to lower your console's temperature
1. Thermal paste replacement
It's the basic service, but also the most effective in terms of results for cost. The old, dried-out thermal paste is removed and replaced with a new, high-quality compound that restores proper heat transfer between the processor and the heatsink. The result is a noticeable drop in temperatures and, as a consequence, a quieter fan and more stable performance.
It's the recommended choice for most consoles that are starting to run hot or get noisy. 👉 Discover our thermal paste replacement service.
2. Liquid metal application (PS5)
For anyone after maximum thermal performance — especially on the PS5, which is particularly demanding when it comes to heat — liquid metal is the most advanced solution. It's a compound based on metal alloys with far higher thermal conductivity than traditional paste, able to cut temperatures drastically and prevent serious problems such as the WLOD (White Light of Death).
However, applying it takes expert hands: liquid metal is conductive and, if applied badly, can damage components. That's why this job should be left to professionals. 👉 Rely on our PS5 liquid metal replacement service with Thermal Grizzly Conductonaut.
3. Internal console cleaning
Whether with thermal paste or liquid metal, we always recommend pairing it with a full internal cleaning. Opening the console to work on the processor is the ideal opportunity to remove all the dust built up on the fan, heatsink and vents, restoring the original airflow.
Internal cleaning alone already improves temperatures; combined with new thermal paste or liquid metal, it delivers the best result and extends the life of your console. 👉 Add our internal console cleaning service.
Thermal paste or liquid metal: which should you choose?
There's no single answer: it depends on the console and on your goal.
- Thermal paste — a reliable, affordable solution, ideal for routine maintenance and for most models. Excellent value for money.
- Liquid metal — top-tier thermal performance, recommended on PS5 when you need the lowest possible temperatures or when the console runs very hot. Requires professional application.
In both cases, internal cleaning is the natural complement to the service. If you're unsure which solution is best for your console, contact us: we'll recommend the most suitable service for your model and how you use it.
Tips to keep your console cool over time
After the service, a few good habits help keep temperatures low for longer:
- Place the console in an open, well-ventilated space, never shut inside a cabinet.
- Leave a few centimetres of free space around the vents.
- Avoid soft surfaces (rugs, beds) that block the air intakes.
- Clean it periodically to prevent new dust build-up.
Bring your console back to the right temperature
A console that runs too hot is not a problem to ignore: acting in time means more silence, more performance and a longer life for your gaming platform. With thermal paste replacement, liquid metal application on PS5 and internal cleaning, we bring your device back to optimal condition.
Contact us: WhatsApp is the fastest way
Is your console running too hot, or would you like a no-obligation quote? Write to us: we'll look at your case and recommend the best service to lower the temperatures. We reply quickly.
- 💬 WhatsApp (messages only): 334.5717643 — the fastest way to get a reply. The number accepts WhatsApp messages only, not voice calls.
- ✉️ Email: info@consolemodding.it
👉 Message us now on WhatsApp and fix your console's overheating.
